(1) W. Chen, L. Chen, X.Y. Pan, Y.S. Xu, S.K. Xu, K. Zhang, J.H. Li*, and M.Y. Zhang, Effect of hot rolling thinning temperature on the interfacial microstructure and mechanical properties of titanium/steel composite plates. Journal of Materials Science 60 5232-5246.(2025年) (2) L. Chen, W. Chen, Y.S. Xu, S.K. Xu, M.Y. Zhang, K. Zhang, and J.H. Li*, Effect of ECAP and semi-solid isothermal heat treatment on the microstructural evolution of 6A02 aluminum alloy. Materials Today Communications 43.(2025年) (3) C.W. Xiang, L.L. Xie, J.H. Li*, G.X. Luo, J.X. Fang, and H.B. Pan, Strengthening and Toughening Mechanism and Corrosion Resistance of 7003 Aluminum Alloy by Thermomechanical Treatment. Journal of Materials Engineering and Performance, DOI: 10.1007/s11665-024-10402-z. (2024年) (4) C.W. Xiang, L.L. Xie, J.H. Li*, Z.X. Xia, G.X. Luo, J.X. Fang, and H.B. Pan, Effect of Extrusion Temperature on Microstructure Evolution and Strengthening Mechanism of 7003-T6 Aluminum Alloy by Equal Channel Angular Pressing. Journal of Materials Engineering and Performance, DOI10.1007/s11665-024-09891-9. (2024年) (5) T.J. Wan, R. Sun, Y.F. Ren, J.H. Li, and M.Y. Zhang, Effect of annealing on microstructure and tensile properties of AZ31/6013 composite sheets. Materials Science and Technology 41 751-769.(2024年) (6) Y.F. Ren, T.J. Wan, Y.S. Xu, K. Zhang, M.Y. Zhang, and J.H. Li*, Effects of stress aging treatment on the microstructure, mechanical properties and electrochemical corrosion behavior of Al-Zn-Mg-Cu alloy. Journal of Alloys and Compounds 997.(2024年) (7) J. Jiang, X.Y. Pan, Y.F. Ren, H.T. Liu, L. Liu, K. Zhang, J.H. Li*, and M.Y. Zhang, Mechanical properties and micro-structural of Al-Zn-Mg-Cu alloy by semi-solid SIMA processed. Materials Today Communications 37.(2023年) (8) G. Li, G. Xu, R. Sun, S. Liang, J.H. Li*, M. Zhang, Effect of ageing on precipitation evolution and corrosion behaviour of Al–Zn–Mg–Cu alloy, Materials Science and Technology 39(2) (2023) 177-186.(2023年) (9) G.S. Li, X.Y. Pan, J. Jiang, J.H. Li*, L.L. Xie, H.T. Liu, and M.Y. Zhang, Achieving ultra-fine grains and high corrosion resistance of Al-Zn-Mg-Cu alloy by ECAP and post cold rolling. Journal of Materials Research and Technology-Jmr&T 26 7354-7368.(2023年) (10) X.Y. Pan, J. Jiang, S.K. Xu, T.J. Wan, H.T. Liu, L. Liu, K. Zhang, J.H. Li, and M.Y. Zhang, The Effect of Compound Growth on the Microstructure and Properties of Titanium-Steel Clad Plate Subjected to High Temperature Heat Treatment. Journal of Materials Engineering and Performance 33 10433-10445.(2023年) (11) J. Jiang, X.Y. Pan, S.K. Xu, L. Liu, K. Zhang, J.H. Li, and M.Y. Zhang, Microstructure Evolution of Al-Zn-Mg-Cu Alloy by Semisolid Compression. Journal of Materials Engineering and Performance 33 10495-10504.(2023年) (12) G. Li, W. Rui, G. Xu, M. Zhang, J.H. Li*, Hot deformation behavior and dynamic softening mechanism for extreme-cooled 7055 aluminum alloy, Applied Physics A 128(3) (2022) 1-13. (13) G. Li, M. Fang, G. Xu, R. Sun, C. Chen, M. Zhang, J. Li*, Effect of high-temperature ECAP on grain coarsening and refinement, Materials Science and Technology 38(3) (2022) 181-190. (14) R. Yu, Q. Chen, P. Wang, D. Zhang, J. Li*, M. Zhang, Effects of Solution Temperature and Aging Time on the Microstructure and Mechanical Properties of TG6 Titanium Alloy, Journal of Materials Engineering and Performance 31(2) (2022) 1456-1464. (15) R. Yu, Q. Chen, X. Zhang, H. Zhang, J. Hao, J. Li*, Constitutive Model and Microstructure Evolution of a Novel TG6 High-Temperature Titanium Alloy during Hot Deformation, Journal of Materials Engineering and Performance 31(1) (2022) 833-848. |
